Gray Flat Ribbon Cable

First, determine the type and quantity of signals to be transmitted by the device, as well as the power, and select the appropriate number of cores accordingly. Second, measure the internal wiring space of the device to ensure that the thickness and width of the ribbon cable are suitable. Third, select products with corresponding temperature resistance and protection levels according to the ambient temperature, humidity, and other conditions. Finally, confirm that the interface type of the ribbon cable matches the device interface. If unsure, you can provide device parameters to dgyzconn's technical team to obtain professional selection suggestions.

If the insulation layer is slightly damaged without affecting the wire core, use insulating tape to wrap it multiple times for repair, covering 2 - 3cm at both ends of the damaged area. If the damage is severe or the wire core is exposed, stop using it immediately. Use wire strippers to remove the damaged part, reconnect with ribbon cables and terminal blocks of the same specification, and reinforce the insulation with heat - shrinkable tubes. If it is difficult to handle by yourself, it is recommended to contact professionals or replace the entire ribbon cable.

During installation, avoid excessive bending of the ribbon cable, and the bending radius should be no less than 5 times the width of the ribbon cable. When cutting the ribbon cable with sharp tools, operate carefully to prevent cutting the wire core. During the wiring process, prevent the ribbon cable from being pulled or squeezed, and leave enough length to accommodate the vibration and displacement of the equipment. For ribbon cables passing through holes, protective sleeves should be installed.

It is not recommended to replace it casually. The transmission function and electrical parameters of cables with different numbers of cores are different, and replacement may cause the equipment to malfunction or even damage it. If replacement is required, a product with the same number of cores, specifications, and electrical performance as the original cable should be selected; If the number of cores needs to be changed due to special requirements, the compatibility of the equipment needs to be re evaluated and professional personnel or dgyzconn technical team consulted.