MX2.54 XP Vertical Short Back Wafer Header

 

The MX2.54 XP Vertical Short Back Wafer Header is made for PCB designs where the space behind the board needs a closer look. Its short-back structure gives designers another option when a standard wafer header may take up more room than the assembly can spare. With a 2.54mm pitch and a vertical layout, this part can be considered for wire-to-board connections in compact electronic devices.

When a connector sits close to other parts, its shape and mounting direction matter. A short-back design may help with board layouts that have limited room on the rear side. Buyers looking for a 2.54mm Short-Back Vertical Pin Header can use this model as a starting point, then check the full drawing and mating parts before making a final choice.

 

 

Space behind a PCB is not always easy to manage. Nearby components, the enclosure and other wiring can all affect how much room is left for a connector. The short-back design of this MX2.54 XP header gives engineers another option when planning the board layout, especially when a longer rear section could get in the way.

 

Before choosing a short-back header, check the board thickness, hole layout, pin length and soldering space. These details help confirm whether the connector can sit where the design requires. If you are comparing a connector wafer with other board connection parts, look beyond the outer shape and check how each one fits into the full assembly.

 

 

The vertical layout gives the connector a clear mounting direction on the PCB. It can suit designs where the Wire Harness needs to connect from a set direction rather than leave the board at a right angle. This is worth considering in control boards, home appliances, communication devices and other electronic products where wire paths need to stay tidy.

A 180 degree short pin wafer header may be used in designs that call for a specific pin direction and a shorter rear profile. Still, the exact pin arrangement and mating housing need to match the drawing. When reviewing a wafer connector 2.54 mm, check the pitch as well as the pin direction. A matching pitch alone does not confirm that two parts can mate.

 

 

The short-back structure is one part of the selection process; the pin length and mating design also need attention. For a short back Wire To Board Connector, buyers should check how the header connects with the wire-side housing, how much pin length is needed for soldering, and whether the finished joint fits the enclosure.

 

Some projects may also compare a wafer connector 2.0 mm with a 2.54mm model during the early design stage. These two pitches are not interchangeable, so confirm the PCB footprint and mating connector before changing the part. Yangzhankang offers a range of connector types, including pin headers, female headers, BOX headers, IDC headers, D-SUB connectors and PH connectors, which gives buyers more options when planning a complete connection system.

 

 

A good connector choice starts with the details that affect the finished product. Dongguan Yangzhankang Electronics Co., Ltd. has worked on connectors and wire harness assemblies since 2010. Its engineering team has gained 26 utility model patents for connector structures, with a focus on design details that affect fit, contact and repeated use.

 

For projects that need a short-back wafer header, Yangzhankang can discuss the board layout, pin arrangement and matching wire harness before sample production. The company operates a production base of around 6,000 square meters and holds IATF 16949 and ISO 9001 management system certifications. Whether you are reviewing an existing design or preparing a new one, the team can support sample checks and volume production based on your project needs.